I couldn't say, but the main switch should not buzz.
-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
Really struggling to find cause of tripping
- Thread starter midas
- Start date
Electrician came and firstly tightened all the connections in the main board (some neutrals were loose apparently)
Then noticed that the big chunky 100A fuse that sits by itself just before the meter had been knocked and wasn't properly seated in it's socket (due to my wife using the under stairs cupboard to store full suitcases I'm guessing).
It's now been wired so it can't hopefully be knocked out easily again.
Plumber came to fix the rad leak too but it was only slight and well wrapped with towels anyway so not sure that was to blame.
I did the usual cooker / fan heater scenario this morning and all seems fine and will hopefully stay that way.
So many thanks again to those for their help here.
Then noticed that the big chunky 100A fuse that sits by itself just before the meter had been knocked and wasn't properly seated in it's socket (due to my wife using the under stairs cupboard to store full suitcases I'm guessing).
It's now been wired so it can't hopefully be knocked out easily again.
Plumber came to fix the rad leak too but it was only slight and well wrapped with towels anyway so not sure that was to blame.
I did the usual cooker / fan heater scenario this morning and all seems fine and will hopefully stay that way.
So many thanks again to those for their help here.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
