Removal of gas fireplace flue and increased condensation

Joined
26 Nov 2024
Messages
43
Reaction score
3
Country
United Kingdom
I was scratching my head why suddenly there is condensation on the windows in the mornings, I couldn't remember having changed any of my habits and always when I switch on the central heating around October windows stay clear and dry fro then on. Even some black dots started appearing on the ceiling above couple of windows.

Well, I did take off the gas fireplace's (which I've never used) flue below to the roof level when I installed the dry ridge and swapped a few roof tiles in the summer. Absent mindedly I also placed a piece of timber or plaster board on top of the flue opening up in the loft, daft idea being if a small animal gets inside it can't get down into the living room...

I've always felt that the loft is very well ventilated, there's always a nice wind up there, so my plan is to just open the flue into the loft space put some mesh on top, ventilate into the loft space and place a few of those plastic underlay spreaders near the flue. I'll then check a few times in the winter if there is condensation in the loft and if there is I'll install a few of those vented roof tile that match Marley moderns. There are alredy quite a few of those round soffit vents.

How's that for a plan? Any better ways to solve the problem? Thank you.
 
Yep, I'd put a plastic cover and some weight on top, the underside was dripping wet, moisture trying to escape.

Undersarking has been fitted quite loosely, so probably didn't need to order the plastic thingies, nice fresh wind blowing as I remembered.

You just can't beat a 1970 bungalow, it's a brilliant design for people to whom the idea of paying for scaffolding is repulsive.
 
OP,
Your flue should be swept, even tho the stack has been taken below roof plane & terminated in the loft. Ventilation is necessary at the bottom of the flue & at the top. Do you only have the one fireplace in the bungalow?

The classic, but disagreeable to some, response to condensation is trickle heat and trickle ventilation.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top