Hi.
I'm trying to replace the knobs on a ~20 year old set of fitted kitchen drawers made by Hettich (Hettich Kirchlengern dawers, part number HK 4340).
I can loosen the front panel of the drawer, by turning a slotted key/screw on both sides of the plastic drawers, but I do not know how to release and take the wooden front panel off the drawer, to get access to the screw holding the knob on.
The panel moves up and down, but is still firmly attached to the drawer. The loosening obviously allows the adjustment of the height of the wooden front panel, but I cannot see how to remove the panel to allow access to the screw/bolt holding the knob/handle on.
I would be very grateful to learn how to do this.
Thanks,
John
View media item 40866View media item 40868View media item 40867
I'm trying to replace the knobs on a ~20 year old set of fitted kitchen drawers made by Hettich (Hettich Kirchlengern dawers, part number HK 4340).
I can loosen the front panel of the drawer, by turning a slotted key/screw on both sides of the plastic drawers, but I do not know how to release and take the wooden front panel off the drawer, to get access to the screw holding the knob on.
The panel moves up and down, but is still firmly attached to the drawer. The loosening obviously allows the adjustment of the height of the wooden front panel, but I cannot see how to remove the panel to allow access to the screw/bolt holding the knob/handle on.
I would be very grateful to learn how to do this.
Thanks,
John
View media item 40866View media item 40868View media item 40867