To fill the holes you could drill the hole out with , say , a 5-6mm drill bit and then apply wood glue to a small , say ,5-6mm, dowel and tap it home. Cut it off flush and rub down with a fine sandpaper.The split timber can be filled with a good two part wood filler.Hope this helps.
If you need to find a tradesperson to get your job done, please try our local search below,
or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Please select a service and enter a location to continue...
Are you a trade or supplier? You can create your listing free at DIYnot Local