We have a 22mm x 15mm stop tap which is leaking from the stuffing gland,
and the t section cannot be removed
Like this
Can I replace with one of these ball valves providing i can get 22mmx15mm.
and replacing would it be shut off valve at mains, remove lead nut 1st then copper, and put on copper 1st then lead.
is this correct.
and the t section cannot be removed
Like this
Can I replace with one of these ball valves providing i can get 22mmx15mm.
and replacing would it be shut off valve at mains, remove lead nut 1st then copper, and put on copper 1st then lead.
is this correct.