Would be grateful for help on following. After my 4 year old son successfully ripped the towel rail off the wall by swinging on it, I decided to replace our existing 600mm radiator with a towel radiator (600x1150).
Pipes are coming out of floor and are 680mm apart. Pipes are 50mm off the wall. There is a sink above the right side pipe preventing a straight up fitting.
Can I avoid draining the system and keep the thermostatic valve? what type of connections would work for a direct swap in and out?
Not experienced at plumbing and okay at relatively straightforward diy. Pictures attached albeit sideways. Any feedback much appreciated.
Pipes are coming out of floor and are 680mm apart. Pipes are 50mm off the wall. There is a sink above the right side pipe preventing a straight up fitting.
Can I avoid draining the system and keep the thermostatic valve? what type of connections would work for a direct swap in and out?
Not experienced at plumbing and okay at relatively straightforward diy. Pictures attached albeit sideways. Any feedback much appreciated.
