replacing Triton Opal II

[freeflyer]

Hi all, i'm replacing a triton opal II due to the normal low pressure problem. Despite doing the dry joints, the C3, and the relay fixes it still states low pressure... so i'm giving up with it.

The problem is, finding a new shower with the water and elecric coutouts in the same (or near the same) place.. to avoid hacking up the tiles again. Does anyone know of a good replacement?

Thanks.

 

[seco services]

Triton T80Z
Mira sport multi fit.

 

[freeflyer]

ah okay thanks..


Also found the triton bezique II will be a direct fit, but looks like it suffers the same inherent low pressure problem (i assume its just a rebranded opal II). I'm guessing all tritons use the same pressure valve microswitch combo?

 

[seco services]

Also found the triton bezique II will be a direct fit

The bezique is quite an old shower now.
Many tritons are the same fittings but the 2 i listed are late model showers.

I'm guessing all tritons use the same pressure valve microswitch combo?

No not all use a pcb but this problem relates to the 7073333 board used in many of the early tritons with a pcb.