- Joined
- 27 Sep 2004
- Messages
- 1,300
- Reaction score
- 83
- Country
I have b***gerd up a bit, and while first fixing managed to make a ring around the sockets, but no legs to the CU.... I was having a bad day and not thinking.... Thing is its now all decorated and sorting it is only really possible by the following:
Spur off from an another ring main in the loft with a 6mm, take in to the back of one of my 4 dead sockets, which are then on another ring of there own but the same circuit.
Is this acceptable, its all protected by a 32A MCB and it is 2 rings really with a piece of 6mm joing them.
I know its not really the done practice... but there isnt much else I can do!
Spur off from an another ring main in the loft with a 6mm, take in to the back of one of my 4 dead sockets, which are then on another ring of there own but the same circuit.
Is this acceptable, its all protected by a 32A MCB and it is 2 rings really with a piece of 6mm joing them.
I know its not really the done practice... but there isnt much else I can do!