Some of the rafters are rotten and not sitting completely straight, where the batten sit of the 1st and 2nd row of roof tiles
Is this a good way to deal with the rot?
1. Use multitool to cut out rot
2. Place a piece long piece of treated 2x4 besides the rafter and sister this in
If i do the above what screw or bolts are best?
Also, does the new 2x4 have to extend/go past the rot by a minimum distance?
Is this a good way to deal with the rot?
1. Use multitool to cut out rot
2. Place a piece long piece of treated 2x4 besides the rafter and sister this in
If i do the above what screw or bolts are best?
Also, does the new 2x4 have to extend/go past the rot by a minimum distance?