We have removed the alarm box to do some house modifications.
also the bell box (volumatic) to have house rendered.
we have tried to wire it up but are stumped.
we have looked at the instuctions and wired it so many different ways but
obviosly not the right one
The alarm was working prior to removal
On the bellbox we have
trig+
trig-
supply+
supply-
strobe+
strobe-
tamp in
tamp out
microswitch 1
microswitch 2
on the alarm (9448+) we have
strobe
bell
12v
0v
tr
internal speaker looped
+
ls
o/p
data
clk
i hope someone can shed some light on this
thanks
also the bell box (volumatic) to have house rendered.
we have tried to wire it up but are stumped.
we have looked at the instuctions and wired it so many different ways but
obviosly not the right one
The alarm was working prior to removal
On the bellbox we have
trig+
trig-
supply+
supply-
strobe+
strobe-
tamp in
tamp out
microswitch 1
microswitch 2
on the alarm (9448+) we have
strobe
bell
12v
0v
tr
internal speaker looped
+
ls
o/p
data
clk
i hope someone can shed some light on this
thanks
