would it be ok to join the cable in order to move the cooker control unit,
also if i used a control unit with a 13amp socket attached could i plug the oven into this or would it be better to add a fused spur to an existing socket circuit.
The appliances are seperate oven& hob.
oven rating 2150w total
hob rating 6270w total
p.s. any chance of a circuit drawing.
also if i used a control unit with a 13amp socket attached could i plug the oven into this or would it be better to add a fused spur to an existing socket circuit.
The appliances are seperate oven& hob.
oven rating 2150w total
hob rating 6270w total
p.s. any chance of a circuit drawing.