servis washer dryer power module

Well, had the pump in bits - all seems fine there. Replaced everything (cleaning along the way) and re-fitted. Ran the machine in spin cycle and all worked fine (note the past tense.)
Just tried the machine on drying mode and the pump started making 'struggling' noises and the machine has filled with water (why this has happened on the drying cycle is beyond me.)

Put the machine back onto spin and the water isn't emptying and the pump is still making the same noises.

Re-checked the re-routed drain pipe and that's fine.

This is AFTER I have replaced all the kickboards in the kitchen.

Nightmare.

I need a glass of wine....
 
Sponsored Links
I've just opened up a second-hand Servis washer/dryer (model M9409S) to give it a fix. The power light only blips when toggling the ON/OFF button. Multiple settings and such have been tried, wiring is good, troubleshooted it down to the pc/control board. It looks fried at the two larger white block (5W) resistors and the small resistor next to it (labeled K35A). I tried testing this various modules unplugged but nothing happened each time. Same little blip on the power indicator light.

Would this be partially burnt board be enough to not let the machine power on at all? All other parts look really good with no damage, etc. so I can't see any other problems.

Whatajob, I sent you a private message about getting a replacement board, hope to hear from ya soon.

Here are the images for reference–
http://bayimg.com/CadGGAadM
http://bayimg.com/CADgmAaDm
http://bayimg.com/CADgnaadM
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top