Shelly 1PM Bathroom Fan

Joined
30 Dec 2014
Messages
98
Reaction score
0
Location
Surrey
Country
United Kingdom
Hi

Have bought a Shelly 1PM to control an in-line bathroom fan - am by no means an electrician but have experience in the past with wiring plugs / light fixtures etc!

Just want to insure I have the right idea for the wiring - have attached a diagram of what I believe should be just after some confirmation from someone else that what am planning to do is correct!

Many thanks
Marc

5522434C-E452-4C1A-91D5-A3FAAEE201C7.jpeg
 
Sponsored Links
It's a while since I saw one of these, but I seem to remember that it was a bit confusing in that the diagram printed on it is showing the external equipment connected to it & not what is going on inside.

In which case the external wiring would be as below, except you want to connect a fan instead of the lamp to the 'O' (Output terminal) I'm not sure if you actually need the manual switch either. Maybe it will work without it, or perhaps you would need to insert a link between L and SW if the switch isn't fitted. Do the instructions not provide this information?


Capture.JPG
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top