shower mixer - wall vs desk mount interchangeable

Joined
11 Dec 2024
Messages
19
Reaction score
0
Country
United Kingdom
good day it is
some shower mixers are wall mount, others are desk mount (fits to bath),
anyone retrofitted DM risers to a wall mount mixer?
the spacing likely matters and ought to match, its more the fitting themselves, are they standard?

asking because theres much more wall mount options on auction sites for e.g. and I'm replacing a DM with spare risers..

thanks
 
Last edited:
Yeah standard UK bar valves are 150mm pipe centres with 3/4 inch BSP union nuts on the back, so deck mounting legs will usually screw straight on without drama. Just double check the thread depth on the legs against the valve unions so the rubber washers compress properly and don't bottom out before sealing. Saves a decent few quid buying the wall valve and legs separate tbh.
 
Ah, its great when standards stay put through the years...
I checked the specs of a few models listed - commonly 150mm on the mixer as you say (between center of inlets) and 180mm apart at the bath surface / riser base.

A money saver I'm sure.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top