- Joined
- 16 Dec 2007
- Messages
- 27
- Reaction score
- 0
- Country
Hi all - as above...our shower pump motor is continuing to overrun when the water is turned off. The water stops flowing absolutely fine, but it takes several goes at fiddling with the shower controls to get the pump to turn off. Water looks as if it's being drawn from the cold water tank in the loft and hot water storage tank.
Pump is a Newteam, I can't find a model type or number on it, but it has all four pipes in a cluster a bit like the one here (although a few years older I suspect!): http://www.newteamshowers.com/projects/cnew001/web/PID.nsf/webpages/ProductsPumpsJetforce.htm
Is there anything simple we can fiddle with to try and resolve this? Any advice gratefully accepted!
Pump is a Newteam, I can't find a model type or number on it, but it has all four pipes in a cluster a bit like the one here (although a few years older I suspect!): http://www.newteamshowers.com/projects/cnew001/web/PID.nsf/webpages/ProductsPumpsJetforce.htm
Is there anything simple we can fiddle with to try and resolve this? Any advice gratefully accepted!