Ok folks, We did have a fully functioning showermate twin 1.4 bar, recently the thing started failing to start every time so i took it out to service it. I have re-installed it following the manual priming both side by connecting the inlet hoses first and getting a good flow through the pump before connecting the outlet side but after doing this the pump fails to work or runs for a few seconds then stops.
I have checked the installation diagrams and its installed as suggested in the manual with the pump possitioned right at the side of the cylinder with the water tank directly above.
I have allso removed both the shower head and hose but nothing seems to work.
Help pulling my hair out here.
Steve
I have checked the installation diagrams and its installed as suggested in the manual with the pump possitioned right at the side of the cylinder with the water tank directly above.
I have allso removed both the shower head and hose but nothing seems to work.
Help pulling my hair out here.
Steve