Sink splashback

[george121212]

Hi not sure if this is the right place.

Want to make a splashback for a sink 500mm wide with about 250mm height. (See photo)

I have one in another room which looks like laminate with some chrome trim that looks good.( See photo)

Would like a splashback in resin/ stone but hard to come by.

Any ideas for a cost effective splashback what materials might I need. Thanks

 

[foxhole]

You can get stone splash back , just used some from lite- stone , it’s only a few mm thick and just glued to wall .
Have some behind my stove.
Comes in 8x4’ and 4’x2’ and smaller tile size , easy to cut .
This is 2mm slate on resin background .