Hi all, I have a problem with a Smeg DWI612C Dishwasher. At the moment the pump seems to run then stops with a couple of alert beeps and therfore will not carry out a cycle.
I have done the error check to see what lights have come up on the display and im getting continous light on 1 and flashing light on 5 (1 being far Left). Looked through trouble shooting guide for error but this one aint there.... Stripped down drainage system and all seems to be clear, there is plenty of water and all the fluid levels for the machine are topped up and there are no blockages. Tried to reset sytem but getting same display, any help would be appreciated.
I have done the error check to see what lights have come up on the display and im getting continous light on 1 and flashing light on 5 (1 being far Left). Looked through trouble shooting guide for error but this one aint there.... Stripped down drainage system and all seems to be clear, there is plenty of water and all the fluid levels for the machine are topped up and there are no blockages. Tried to reset sytem but getting same display, any help would be appreciated.