i am currently preping for a wood burner to be fitted to my fireplace , i was thinking of having slate for the hearth base , the slate tiles i have seen are about 8-10mm thick , will these be ok as the wood burner is 9kw max, & is it best to lay them with fire resistant tile adhesive , cheers |darren
suitable tile for woodburner
- Thread starter firekill
- Start date
Sponsored Links
Most tile addy will take heat up to 150 deg...
Just check with the mfr off the adhesive you have...make sure you have the correct distance from burner to wall...again follow mfr guidance re the burner installation...
Tiles will be ok just make sure you seal them ect..
Just check with the mfr off the adhesive you have...make sure you have the correct distance from burner to wall...again follow mfr guidance re the burner installation...
Tiles will be ok just make sure you seal them ect..
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
