Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
Hi, to swap a radiator do you need to be gas safe registered to turn off the boiler , drain down the system, fit new radiator then the re-fill by the filling loop under the boiler.
Not at all.....in fact once the pressure has been released from your system, the draining down could be minimal too.
Turn the other rads off to minimise air locks.
John
If its the same size, close the valves, drain rad (or get help and stick thumb over ends) take outside, drain and remove tails and fit these into new rad then fit. Easy done.
Its a different sized radiator so will have to alter the pipework under the floorboards and come back up, just wasn't sure if you needed to be gas safe to do this.
If you need to find a tradesperson to get your job done, please try our local search below,
or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Please select a service and enter a location to continue...
Are you a trade or supplier? You can create your listing free at DIYnot Local