hi,just fitted a thermostatic bar, switched it on and it runs for 1/2minute,loses pressure and stops,when i turn it over the safety switch to high water comes back on but is too hot,my hot water is supplied by combi-boiler(brandnew),cold water from tank in loft,with supply to the bar taken from hot/cold pipes in bathroom.pressure from shower is good.one suggestion was to fit a water pressure equalising valve but is this the only solution?.
-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
thermostatic shower bar
- Thread starter harry7
- Start date
why have you taken the hot from mains pressure combi and the cold from a tank and not the mains.
they need equal pressures to operate correctly
they need equal pressures to operate correctly
hi seco i should have twigged that the cistern was not mains.Iwill take a tee from the main to the inlet.Thanks for that.
should be easy as the mains feeds the tank, so just another section of pipe.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Similar threads
