I WOULD LIKE TO INSTALL A THERMOSTATIC TOWER SHOWER IN A CUBICLE,HAVE A COMBI-BOILER MODEL (MAIN 30 HE).CAN I BRANCH OF THE BATH TAPS NEXT TO CUBICLE AND CONNECT STRAIGHT TO SHOWER.SHOWER STATES THAT I HAVE ATLEAST 2 BAR PRESSURE.HOW DO I FIND THE WATER PRESSURE? PS SHOWER HAS 6 BODY JETS. BOILER IS IN KITCHEN ,CUBICLE ON 1ST FLOOR. ADVICE VERY WELCOME.THANX
thermostatic tower shower
- Thread starter aidrian
- Start date
Sponsored Links
TURN CAPS LOCK OFF.
Measure the water pressure with a gauge, £10
Check the requirement Flow for the showering thing. You will only get about 10 litres/minute from your combi.
The shower will only work if all the other taps are shut, probably, so unless the pressure'/flow resistance is awful it won't make much difference where you get it from.
Measure the water pressure with a gauge, £10
Check the requirement Flow for the showering thing. You will only get about 10 litres/minute from your combi.
The shower will only work if all the other taps are shut, probably, so unless the pressure'/flow resistance is awful it won't make much difference where you get it from.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
