Tiles or anything else

[wjman]

Hi,
I program ,set and operate a waterjet machine and If anybody has any tricky cuts to do in tiles, maybe holes or funny shapes, come to think of it pretty much any material, I can help.
If you live fairly close to Redditch (Near Birmingham, England) email
me, and we'll sort it.
Mark...

 

[fountainman]

you would need to put your email address in your PROFILE

 

[wjman]

Hi,
Sorry I thought it was viewable to others, it should be now.
Mark...

 

[haveabash]

Hi Mark,
although I now live in winchester, my family still live in Studley. I get up there every so often, and so yes you may be able to help. Can you cut stainless from an autocad drawing? I am wanting to make some stainless wall lights, into which I would like to stick some stained glass. Can you cut glass too? Four of them there would be. Lemme know, it would be great if you could, been looking for something to do that for ages, and didn't want the burned edges left by a plasma cutter in this project.
Cheers

Lee

 

[wjman]

Hi Lee,
Yes I cut stainless regularly, and as for glass I reckon I have had about 95% success (sometimes it can crack). I can cut from autocad dwg or dxf and many other formats. I go on holiday on wednesday 2nd june for a fortnight so if you want to contact me after the 16th I should be able to help.
Mark...

 

[haveabash]

Cheers Mark,
I will do
Thanks
Lee