Hi All
Just finished tiling the utility room floor and not looking at options for the transition down from the tiled floor to the concrete floor below.
This would usually be ok but the issue I have is the height at one end of the doorway to the other is different, ie lower on left, higher on right. This is the result of a poor screed job before the tiles went down.
I can get a picture but after ideas.
Without measuring I'm guessing the height is about 10mm rising up to 20mm on the other side.
Just finished tiling the utility room floor and not looking at options for the transition down from the tiled floor to the concrete floor below.
This would usually be ok but the issue I have is the height at one end of the doorway to the other is different, ie lower on left, higher on right. This is the result of a poor screed job before the tiles went down.
I can get a picture but after ideas.
Without measuring I'm guessing the height is about 10mm rising up to 20mm on the other side.