Hi all any advice appreciated I fitted two radiators both with trv,s rad not getting hot after investigating I have found one trv is on the flow on one rad but on the return on the other rad question is would this stop rads from getting hot thanks in advance
If it worked okay before. Make sure valves are fully open, turn heating on and turn off the radiators that are Working. You should hear a gurgle and then they should work.
If they didn't work before. Possible blockage.
Jeff
Both were new rads when fitted had to extend pipe work to fit extra rad so most of pie work is new I have taken both trv heads of and one rad is getting hot now one pipe is hot one is cold on both rads as if it's not returning
If you need to find a tradesperson to get your job done, please try our local search below,
or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Please select a service and enter a location to continue...
Are you a trade or supplier? You can create your listing free at DIYnot Local