Before I start, great forum guys/girls.
Here's my problem, I recently extended my bathroom by knocking down a stud wall and extending further into a bedroom.
As expected, the floor joist holding the stud was reinforced (3 joists together). The problem is that it was 1/2 inch higher than all of the others on either side.
New boards were layed over leaving a slight (invisible) peak about 1/3 of the way into the room.
I'm about to pick floor tiles but I'm nervous about getting large ones due to the possibility of cracking near the peak.
Will I be OK if I get very small mosaic tiles? say 1 inch square?
Also, Will they adhere directly to a 1/2 inch marine ply under boarding I intend to screw to the floorboards?
Here's my problem, I recently extended my bathroom by knocking down a stud wall and extending further into a bedroom.
As expected, the floor joist holding the stud was reinforced (3 joists together). The problem is that it was 1/2 inch higher than all of the others on either side.
New boards were layed over leaving a slight (invisible) peak about 1/3 of the way into the room.
I'm about to pick floor tiles but I'm nervous about getting large ones due to the possibility of cracking near the peak.
Will I be OK if I get very small mosaic tiles? say 1 inch square?
Also, Will they adhere directly to a 1/2 inch marine ply under boarding I intend to screw to the floorboards?