Uneven concrete floor

Joined
10 Oct 2020
Messages
1
Reaction score
0
Country
United Kingdom
Hi

First post so be kind...

My kitchen floor is concrete and tiles and is very uneven.
From the door it slopes up to a high point at about 2/3 of the length and in the centre. To the right it slopes from this point to a depth of 90mm, both ends of the kitchen are, give or take, 50mm lower than the highest point.
The floor is effectively bowed upwards side to side, but downwards along the right hand wall.
Unhelpfully i’m a mechanic rather than a builder and have no idea how to go about levelling the floor. Screed doesn’t seem to be suitable for the depth and I can’t find alternative solutions.

Any help or suggestions would be great

Rick
 
Sponsored Links
Do you intend to break the tiles out? Asking because part of the issue may be the way the tiles have been bedded.
 
Best way is get everything up and back to the concrete then find the highest area.
what we do then is put a lazar Level there and fire it Across then room then write down every meter how low it is.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top