- Joined
- 25 Jun 2020
- Messages
- 12
- Reaction score
- 2
- Country
Hi all.
Installing a patio. 400x400x40 tobermore concrete slabs on a sand base.
I am in the process of finishing the sub base layer, 100mm or so of 803 stone. I am having some trouble getting it level and i have run out of stone. I was aiming for 75mm from top of base layer to top of slab. 35mm for sand and 40 for slab. The hardcore is between 70mm and 90mm to the top of my finished level when measured in a few places. Is this an ok tolerance? It means my sand will be between 30mm and 50mm deep?
B
Installing a patio. 400x400x40 tobermore concrete slabs on a sand base.
I am in the process of finishing the sub base layer, 100mm or so of 803 stone. I am having some trouble getting it level and i have run out of stone. I was aiming for 75mm from top of base layer to top of slab. 35mm for sand and 40 for slab. The hardcore is between 70mm and 90mm to the top of my finished level when measured in a few places. Is this an ok tolerance? It means my sand will be between 30mm and 50mm deep?
B