Hi there had a leak in my tank and tried to epoxy it but no go so got a new tank and swapped them over, tightened them up (was a bit tight getting the fittings back on but they are going on, have tightened them down and put the water back on and the flow/return is dripping a bit
did 8-10 wraps of ptfe tape, need more?
have tightnened them down fairly tight not sure how tight i should go or if i should just take the tank out again and re-apply the tape and try again?
thanks for any insight
did 8-10 wraps of ptfe tape, need more?
have tightnened them down fairly tight not sure how tight i should go or if i should just take the tank out again and re-apply the tape and try again?
thanks for any insight