Unvented Tornado Elite - Indirect.

Joined
8 Dec 2008
Messages
109
Reaction score
0
Location
Kent
Country
United Kingdom
Couple of questions need some help with please.

Do i just turn the mains off to stop hot feeds to taps.

Is it possible to alter the pressure received at the taps/ shower from this cylinder? (There is a pressure guage near the cylinder.)
 
you will stop the hot taps by turning off the mains.
what is wrong with your pressure?
 
Well its not exactly the presure. it is leaking into the tundish. Do i have to drain down cylinder to bring pressure back up
 
Before Bird Brain gets hold of this and tells you the house is about to implode, I would strongly recommend you find an engineer with the correct accreditation to work on unvented and get it checked.

There seems to be a fault somewhere thats causing the water to enter the tundish, this needs to be investigated and rectified by an expert.
 
I guess it wouldnt implode due to the safelty measures taken with unvented.

If i wanted to drain the cylinder is there anything i need to do to bring up to correct pressure or will filling it simpily do this?
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top