unvented water cylinder installation

19 Jan 2008
Reaction score
United Kingdom
hi there.

Abit of a bold question but I have a 100 litre santon premier plus unvented electric water heater to install (have the expansion vessel, PRV etc) but to find a reliable qualified installation engineer in Leeds to price up installation seems impossible. What is the average installation costs? I assuming "t' off the rising main the the cellar and join the existing hot water pipework on the ground floor, 8 ft above.

Sponsored Links
I would say a day rate in leeds would be about £200 -£300 but dont quote me on that,its a while since i was self-employed,but you would probably get a set price for this job regardless of the time it took.
You must not attempt this job yourself ,its not a diy job, if you get stuck for someone send me a message and i will see if i can help out finding someone local,but no promises.
Many thanks.

That would seem about what I expected as I had someone in to install a Redring Powerstream, to install that and isolate my old gas combi and drain down the radiator circuit cost me 300.00. Does sound as though that is a standard rate.

Thanks for the warning, I was not thinking of doing it myself - im not qualified nor confident.

Next to find a qualified installer, any personal recommendations would be welcome.


DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.

Are you a trade or supplier? You can create your listing free at DIYnot Local

Sponsored Links