We only have a cold feed in the downstairs toilet. So with the combo tap can i just use one tail going into the cold feed ? Or will the water come out of the hot outlet tail ?
Using one tail only on toilet tap
- Thread starter trevorbayliss
- Start date
Sponsored Links
If it's a mix in the body monobloc then yes, probably
Sponsored Links
It is a mix mono bloc and we currently have a piece of copper coming up and then forming 2 forks. So the current set up does feed both hot and cold, but this is a little sink without any stand and so everything is visible and i would prefer just a clean single pipe going up the corner of the wall to feed the cold only. The cold feed is currently leaking (just discovered it this eve) and so i have capped it off and removed the fork and tails. Hence my new thinking when i get a new tail put back in.
Any idea why the tail has failed. It maybe that the tail was not screwed in far enough, but it has been ok for 7 years now and i reckon this has happened only recently.
Any idea why the tail has failed. It maybe that the tail was not screwed in far enough, but it has been ok for 7 years now and i reckon this has happened only recently.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
