- Joined
- 7 Oct 2022
- Messages
- 17
- Reaction score
- 2
- Country
Hello All
I did have a thread about this last year but not sure if it is still 'active', hence this new post.
I have a Vaillant Ecotec plus 630 and a VRC 470F Controller. The controller has a radio receiver in the boiler facia.
Now I have a Sensohome controller to install with internet gateway.
The radio receiver for this must be wall mounted and ebus connected.
The question is, how to I disable the original radio receiver? It looks like it is connected to the PCB via the LCD display.
There is a loop connecting the RT24V terminals. I'm thinking remove this?
Any advice gratefully received.
I did have a thread about this last year but not sure if it is still 'active', hence this new post.
I have a Vaillant Ecotec plus 630 and a VRC 470F Controller. The controller has a radio receiver in the boiler facia.
Now I have a Sensohome controller to install with internet gateway.
The radio receiver for this must be wall mounted and ebus connected.
The question is, how to I disable the original radio receiver? It looks like it is connected to the PCB via the LCD display.
There is a loop connecting the RT24V terminals. I'm thinking remove this?
Any advice gratefully received.