checked the pressure on the boiler after it had been off all day and it was showing 0.6 bar with the maintenance symbol flashing.
Opened the 2 valves on the filling loop for like less than a second and it shot up to 1.1 bar where it’s sat for the past few hours.
Honestly the tiniest amount of water must have entered the system, I don’t see how the readings can be accurate. This is a big system with 20+ rads.
What do you think?
Opened the 2 valves on the filling loop for like less than a second and it shot up to 1.1 bar where it’s sat for the past few hours.
Honestly the tiniest amount of water must have entered the system, I don’t see how the readings can be accurate. This is a big system with 20+ rads.
What do you think?