Varnishing Floor - Final Coat
- Thread starter RK_London
- Start date
OP,
You need to prime the sanded floor before applying the finish.
Use Bona Mega rollers to apply the primer & the finish - cut in with whatever brush they recommend.
Before priming use professonal Tack Cloths to pick up dust & debris.
Ask Mega for advice on how to dispose your tack cloths & any other items - dont just bin them.
You need to prime the sanded floor before applying the finish.
Use Bona Mega rollers to apply the primer & the finish - cut in with whatever brush they recommend.
Before priming use professonal Tack Cloths to pick up dust & debris.
Ask Mega for advice on how to dispose your tack cloths & any other items - dont just bin them.
OP,
Apologies, I didn't read your OP post correctly.
It depends on just how much debris has been trapped, over an large area or a patch - if you can live with it (covered by furniture, say?) then leave it alone.
Or you could remove the dust by sanding down with a belt and an orbital sander but blending-in the varnish might end up with it looking worse than with the dust?
Apologies, I didn't read your OP post correctly.
It depends on just how much debris has been trapped, over an large area or a patch - if you can live with it (covered by furniture, say?) then leave it alone.
Or you could remove the dust by sanding down with a belt and an orbital sander but blending-in the varnish might end up with it looking worse than with the dust?
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
