- Joined
- 30 Dec 2019
- Messages
- 39
- Reaction score
- 0
- Country
I have found that the towel rail radiator connection leaks very slightly.
It doesn't drip, it is just slightly wet at the points shown in the photo. The leak is so minor that I am not getting any noticeable pressure loss in CH system.
What approach is best to take?:
1. Do nothing as leak is not affecting system
2. Try and tighten the nuts
3. Drain towel rail, remove it and add PFTE tape before re-installing
Thanks
It doesn't drip, it is just slightly wet at the points shown in the photo. The leak is so minor that I am not getting any noticeable pressure loss in CH system.
What approach is best to take?:
1. Do nothing as leak is not affecting system
2. Try and tighten the nuts
3. Drain towel rail, remove it and add PFTE tape before re-installing
Thanks