Vokear Mynute fires for 2 secs then out

Joined
10 May 2006
Messages
968
Reaction score
41
Country
United Kingdom
Went to this one today after spending all day sorting frozen condensate pipes!!

Go this one and condensate pipe was frozen so sorted that.

When i opened the boiler there was a load of water lying in it. Pulled off pipe to combustion chamber to make sure it wasnt full of water but nothing came out.

Anyway the boiler light for about 2 secs then out then keeps doing this until it goes to lock out with an 10 fault (igniton problem).

Pulled out the weird shaped rectifcation lead and gave it a clean. Pulled out the electrodes and am definately getting current to them as i managed to get a shock. Didnt really see a massive spark though!!

Put them back in and she is lighting. Am getting plenty of gas through.

Couldnt get any parts this evening so im back on Monday.

Any thoughts?

G
 
Sponsored Links
Hey G. hows it hangin, ;) is it doing this on both water and heating demands?
 
Sponsored Links
Could be flame detection shorting cos it gets to main flame stage so that usually rules out PCB, and the problem happend after freezing.

have you checked pump, it can be the obvious ,mate.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top