vokera mynute 14-48se not lighting

Joined
19 Nov 2007
Messages
3
Reaction score
0
Location
Glasgow
Country
United Kingdom
my boiler does not start when switched on, pressure at 1.5 and fan like noise but not lighting and no heating. Dont have instruction manual, so even if its just a matter of ignition, talk me through it please!
 
Probably the pump differential pressure switch not being activated, possibly faulty diaphragm or air in diaphragm housing. Check that the swoitch is moving when the boiler is switched on off, pump runs anyway when power switched on and controls asking for heat , the switch activates the rest of the sequence to fire up.
 
dont actually know what the pump differential pressure switch is but when i open and close the gas inlet it fires up but doesnt stay on
 
verrry strange , are you getting a flame????, if you are opening and closing the yellow handle underneath it should have no effect on anything as far as switching boiler on and off, that handle shuts gas off.
 
getting a flame most times and this seems to be the only thing which gets a result, I know it shuts off the gas but I'm all out of ideas. We tried the Vokera website for instructions but this seems to be the only model they don't have any literature on.

PS. what exactly is a pump differential pressure switch and where do you find it?[/list]
 
Not much to go wrong in this boiler. Well made using good solid brass components.

Almost certain boiler in need of proper service. And parts are very reasonable.

Can provide above service in Glasgow
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top