-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
Washing machine leakage
- Thread starter Srinivas
- Start date
- Joined
- 19 Jan 2006
- Messages
- 493
- Reaction score
- 6
- Country
Srinivas:
The problem is most likely that the drain pipe isn't high enough off the ground.
The end of the drain hose off the back of the washing machine should be at or slightly higher than the elevation of the water inside the machine.
If it isn't, then water will drain out of the machine all the time it's running, just as you've discovered.
You need to raise the end of the drain hose to keep the water from coming out of the machine until the agitate cycle is over, at which time the motor will change it's direction of rotation and both spin the water out of the clothes and pump the water out of the machine at the same time.
The problem is most likely that the drain pipe isn't high enough off the ground.
The end of the drain hose off the back of the washing machine should be at or slightly higher than the elevation of the water inside the machine.
If it isn't, then water will drain out of the machine all the time it's running, just as you've discovered.
You need to raise the end of the drain hose to keep the water from coming out of the machine until the agitate cycle is over, at which time the motor will change it's direction of rotation and both spin the water out of the clothes and pump the water out of the machine at the same time.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
