What size washer for bath trap?

[JT101]

Hi guys.

I always seem to run into this problem. I can never seem to get replacement seals for various plumbing parts, and because I'm not a plumber, I rarely carry spares of these things.

Tried plumbers merchants but they didn't want to help. Jobsworth on the front desk.

OD is about 44mm, ID about 34-35mm. Thickness 2-3mm. You can see the trap in the photos. Any ideas what the size is and where i can get it?

I could replace the trap, but that's not available locally either

Cheers

 

[jj4091]

Probably cheaper to get a new trap https://www.jtatkinson.co.uk/pr/pwvi002/viva-40mm-50mm-seal-bath-trap-wtb4050 or

https://www.ebay.co.uk/p/564321202

 

[JT101]

Thats' what I did in the end, but I can't believe you can't get a washer for these. The new design like hte one in the link seems to be the standard and uses a different design with a 38 or 40mm diameter thin washer, as opposed to a flat washer. It's probably a mute point now since they're all designed the new way now, and it seems you can get replacment seals. Thanks