Hope this is the right section ?
So I have a bathroom vanity unit with a discoloured side panel not large at 80 x 31 cm. Not in full view but needs re-covering to smarten it up. I have looked at Formica...very expensive but then found an excellent website selling and cutting all types of white plastic sheet to size
They do a coloured acrylic sheet, rigid uPVC and Polypropylene sheets around 1.5 - 3mm thick and all in gloss white. Looks OK and I have ordered some samples to be sure. I've also asked them what adhesive would they recommend to stick the sheet to the MDF as being plastic there are of course limits.
But I thought I would ask the many good folk here if they have any suggestions please ?
So I have a bathroom vanity unit with a discoloured side panel not large at 80 x 31 cm. Not in full view but needs re-covering to smarten it up. I have looked at Formica...very expensive but then found an excellent website selling and cutting all types of white plastic sheet to size
They do a coloured acrylic sheet, rigid uPVC and Polypropylene sheets around 1.5 - 3mm thick and all in gloss white. Looks OK and I have ordered some samples to be sure. I've also asked them what adhesive would they recommend to stick the sheet to the MDF as being plastic there are of course limits.
But I thought I would ask the many good folk here if they have any suggestions please ?