Will "worktop" come off Bosch dishwasher?

[JohnD]

My mother has a
SMS 4472GB
0730 102 336
01579418
712 DS GB

The floor covering is rucked up and the subfloor is uneven.

I slid it back on some pieces of acrylic sheet but it is too tight to the worktop above.

I had a similar one where the 18mm top was removable and I think had a soft black plastic underneath.

I can only see two screws, at the back, thety seem to be in dimples in a piece of light galvanised sheet, the screws are head-downwards and look as if they go into the top.

Can I take the top off and gain a bit of space?

 

[jj4091]

does it have removable feet?

 

[JohnD]

not big enough. Just buttons. Probably one of them is adjustable, didn't notice.

The kitchen floor is solid, higher by the wall where the back of the machine sits. The worktop was scraping on the top of the machine before I put the acrylic sheet down. The floor is not smooth so it will not slide or walk in without the sliding sheet, and if I take the button feet off I will be trying to slide the metal chassis back, which will probably be even worse.