wiring drayton rts5 to a worcester junior 28i

[nealjane]

Gotten a thermostat RTS5 for my boiler, (no existing thermostat)

Would be grateful for wiring advice -

boiler has -

neutral NS
Live LS
Switched live LR

RTS5 has -

N
L
1-COM
2-heating satisfied
3-Call for heat

I need to remove the link on the boiler and then -

Am i right by wiring the following? (boiler - thermostat)

neutral - N
Live - L + COM (linked)
switched live-call for heat

Any particular cable for the job?
3 core & earth 1mm???

 

[nealjane]

any one out there????

 

[nickso]

here

http://www.invensyscontrolseurope.c...7E3-69D1AABD499A/0/D32_8RTS5Energyleaflet.pdf

wire it as shown and then set your heating to come on 30mins before you actually want it as this is approx how long this stupid roomstat will delay it before firing the boiler.

 

[nealjane]

yep already read that - i was just hoping someone with a bit of wiring knowledge could help me out.

thanks anyway.....

 

[nickso]

yep already read that - i was just hoping someone with a bit of wiring knowledge could help me out.

thanks anyway.....

sorry i appear to have no wiring knowledge then

im not sure what you are having difficulty with....its pretty clear what you need to do if you read the link or the instructions that came with the stat.

 

[nealjane]

ok , so ive got 3 point on the boiler and 5 points on the thermostat - whats so clear about that!?

......and why cant all thes manufacturers just use the same names for the d*mn points!

 

[namsag]

Ignore the heat satisfied on stat, this is not req on your system