hello, i was wondering if anyone could help me, i want to wire an outside light and a water feature to a 2 gang 2 way switch. i know that the com is live but not sure where to but the earth and netual wires in the switch. the switch says one way or two way. in trying to wire the switch up i've already blown a fuse so was wondering if someone could help. please.
wiring
- Thread starter keithdonoghue
- Start date
If it is a light switch it is no good as a supply for what you want as there is no neutral (or should not be!) there. You may have to find the nearest socket on your ring final and wire a fused spur off that. If your supply to the circuit has no RCD then you will have to use a RCD fused spur.
B
breezer
i personally would use two timers, but have a look in for refernce (page 3 )
Please call an electrician - you know absolutely nothing, and what you've said here shows that you haven't given any thought whatsoever to what a switch must do.keithdonoghue said:
The combination of no knowledge, no thinking, and electricity outdoors is a very dangerous one.
Also, there is the law to consider....
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
