I bought a new 10amp 2 gang switch for two lights in the same room.
The existing (old) switch terminals are labeled A B1 B2 at the top and A1 A2 B at the bottom. The wires into these terminals are as follows:
Terminal A (top) has a red wire connected from it to terminal B (bottom).
Terminal B1 (top) has a blue wire into it.
Terminal B2 (top) is empty.
Terminal A1 (bottom)has a yellow wire into it.
Terminal A2 (bottom) is empty.
Terminal B (bottom) has a red wire connected from it to terminal A (top).
The new switch has at top; com, com and at bottom; 1 way,2 way, 1 way, 2 way, plus an earth terminal.
Can someone please help me with how to wire the new switch.
The existing (old) switch terminals are labeled A B1 B2 at the top and A1 A2 B at the bottom. The wires into these terminals are as follows:
Terminal A (top) has a red wire connected from it to terminal B (bottom).
Terminal B1 (top) has a blue wire into it.
Terminal B2 (top) is empty.
Terminal A1 (bottom)has a yellow wire into it.
Terminal A2 (bottom) is empty.
Terminal B (bottom) has a red wire connected from it to terminal A (top).
The new switch has at top; com, com and at bottom; 1 way,2 way, 1 way, 2 way, plus an earth terminal.
Can someone please help me with how to wire the new switch.