Hello
I recently moved to a house with the above boiler and a Trevi mixer shower. The shower is a seperate room on its own on the upper floor. I decided to have the boiler serviced and had the diaphragm replaced etc as i'd found the heating in the shower a little variable. The heating pressure is set to 1.5.
Following the service, the shower wouldn't fire the boiler at all. We found that it would fire if we removed the shower head, so figured it was the head being scaled up. Replaced the shower head and all was good.
A month down the line and again the demand light doesn't seem to want to operate when the shower is turned on. All the hot taps upstairs and down start it instantly so i'm at a bit of a loss. I'd be grateful for any thoughts on this as having baths is a little annoying.
Cheers
Paul
I recently moved to a house with the above boiler and a Trevi mixer shower. The shower is a seperate room on its own on the upper floor. I decided to have the boiler serviced and had the diaphragm replaced etc as i'd found the heating in the shower a little variable. The heating pressure is set to 1.5.
Following the service, the shower wouldn't fire the boiler at all. We found that it would fire if we removed the shower head, so figured it was the head being scaled up. Replaced the shower head and all was good.
A month down the line and again the demand light doesn't seem to want to operate when the shower is turned on. All the hot taps upstairs and down start it instantly so i'm at a bit of a loss. I'd be grateful for any thoughts on this as having baths is a little annoying.
Cheers
Paul