Y PLAN STAT HELP

[LONGCOMMON]

hi guys ive brought a new wall stat but no quite sure as to where the wires go into my 10 way box as the box is wired to honeywells wiring here is the stat i brought could you tell me which wire goes where http://www.sunvic.co.uk/tlx7501rt.html

 

[Rob]

C-goes to the HW on terminal from your clock.

2- goes to the orange wire of the motorised valve.

If your replacing an existing room stat then more than likely it will be 1 and 3 on the old one. Just put these two to 3 and 2!

 

[gas4you]

4 on honeywell wiring centre to C, 5 on Honeywell wiring centre to 1

 

[MANDATE]

ROB884. I understand the 'switched live' from the room stat goes via the ten way box to the 'white' wire of the motorised valve.
The 'orange' wire is connected to boiler and also cylinder stat but not the room stat. do you not agree?

 

[Rob]

yeah my mistake, was referring to cyl stat, hence the HW on bit