Please help just fitted a new drain sump hose with machine lying on its side.First wash at start of cycle the water kept filling up in machine till it started coming out of soap drawer.I shut it down and set it to empty.Any ideas of problem.
-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
Zanussi FL828 Washing Machine overfilling with water
- Thread starter banksie
- Start date
You may have filled with water the pressure sensor that measures depth of water. This could mean the sensor cannot measure the water level.
A unit fitted somewhere about level with the top of the drum and connected to the base of the drum with a small hose pipe. Will have a cable or a few wires going to it. Probably on the side that you lent the machine towards.
If there is that type of sensor than check the hose is empty, if not pull of the sensor to let pipe and sensor drain out.
A unit fitted somewhere about level with the top of the drum and connected to the base of the drum with a small hose pipe. Will have a cable or a few wires going to it. Probably on the side that you lent the machine towards.
If there is that type of sensor than check the hose is empty, if not pull of the sensor to let pipe and sensor drain out.
B
breezer
more than likley you knocked the small pipe off that leads from the pressure chamber to the pressure switch
hotpoint example
hotpoint example
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local