Zanussi Lindo300 dryer fault

Hello,
Mod: ZDC8292P
Prod no: 916 097 379 00

When Zanussi lindo300 dyer turned on all lights come on fine.

When start is pressed the led turns from amber to flashing red with three peeps sounding.

It will not start.

I cannot work our how to make the machine tell me what the error code is.
I’ve tried Turning it off then back on whilst pressing start a and another button (no dial) but to no avail.

TIA

 

Not the same dryer but should be the same

Turn it to any cycle apart from the first on the right and let it light up.

Then press and hold the start button and the button to the left of it.

Keep them both held in and after a few seconds the leds will go out so then let go of the buttons.

Now the start light will flash.

You need to count the number or red flashes from it and the number of green flashes

 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.

Please select a service and enter a location to continue...

Plumber / Gas Engineer Electrician Builder Decorator Builders' Merchant Plumbers' Merchant Tile Supplier Flooring Supplier
Start Search

Are you a trade or supplier? You can create your listing free at DIYnot Local