Hi all.
I have seen similar topics on the forum, but not the same as my experiences.
I have what I think is a Mira Go 8.5kw shower (maybe it's a 9).
It seems to run fine for about 5 to 10 mins, then trips the RCD. When you switch it back on, ots runs for another 3 or so mins then trips.
When it trips there is no change in the water temperature.
Yesterday I did hear the Fuse box making a very low buzzing noise after a short while of being the shower on.
Do we suspect a problem with the Rcd or the shower?
I have seen similar topics on the forum, but not the same as my experiences.
I have what I think is a Mira Go 8.5kw shower (maybe it's a 9).
It seems to run fine for about 5 to 10 mins, then trips the RCD. When you switch it back on, ots runs for another 3 or so mins then trips.
When it trips there is no change in the water temperature.
Yesterday I did hear the Fuse box making a very low buzzing noise after a short while of being the shower on.
Do we suspect a problem with the Rcd or the shower?